engineering notes
Technical updates on maxon DC motor selection, brushless EC motor sizing, servo controller setup and regulated device documentation.
2026-08-25
Choosing between brushed and brushless DC motors? Here's a total-cost comparison from a procurement perspective, plus when a maxon BLDC motor is worth the premium and when it isn't.
Read article2026-08-25
Choosing between a maxon motor, maxon motor controller, or a closed loop stepper motor depends on your application. A purchasing professional shares practical guidance on small DC motors, ball bearings, and when to spend on Swiss precision.
Read article2026-08-24
After years of buying low-cost motion components, an office administrator explains why premium motors from maxon motor gmbh are the real value for B2B brands.
Read article2026-08-24
A cost controller's honest take on maxon-motor products: maxon brushless dc motor TCO, the maxon air s motor, gear motors, dc servo motors, and how fast can a stepper motor turn.
Read article2026-08-21
A motion-control engineer explains how a maxon brushed dc motor with plenty of torque still failed on the job—and how a 12-point checklist prevented 47 similar mistakes.
Read article2026-08-21
What happens when a linear actuator fails? A field checklist for engineers and procurement: check power, verify the maxon motor datasheet, inspect the timing belt, and choose the right DC servo motor replacement.
Read article2026-08-20
Practical FAQ about maxon-motor, maxon EC motor vs brushed DC motor, what to look for in a servo motor manufacturer, squirrel cage induction motor basics, and how ball bearings are made—written by an office buyer.
Read article2026-08-20
An engineer's hard-earned lessons on motor selection — from a servo motor SG90 failure to maxon motor EPOS controllers and closed-loop stepper motors. How fast can a stepper motor turn? The answer matters less than the torque curve, and both matter more than the price tag.
Read article2026-08-19
A cost controller compares maxon motors, stepper motors, and single-phase induction motors across three common industrial scenarios. Includes TCO analysis, speed limits, wiring tips, and a decision guide.
Read article2026-08-19
A failed maxon EC motor taught me why the cheapest quote often becomes the most expensive one—and how timing belts, universal joints, and ball bearings fit into the TCO picture.
Read article