engineering notes
Technical updates on maxon DC motor selection, brushless EC motor sizing, servo controller setup and regulated device documentation.
2026-09-07
When six out of fifty label applicators failed endurance testing, we finally had to answer a basic question: what’s a stepper motor doing in a motion profile with no feedback? A quality manager explains how a maxon brushless DC motor and a servo drive solved it.
Read article2026-09-04
An admin buyer with five years of motor purchasing experience explains why VFD compatibility is the wrong spec for maxon-motor DC products and why replacing a timing belt with a direct-drive motor starts with the load, not the part number.
Read article2026-09-04
A quality inspector's checklist for maxon-motor DC and servo products, torque sensor ebike units, high torque servo motor specs, what's a VFD, and why maxon motor news matters.
Read article2026-09-03
A quality inspector with a decade of motor acceptance testing explains when a maxon brushless DC motor like the EC-i 40 is worth the cost, what VFD stands for, and why an induction motor diagram doesn't tell you the whole story.
Read article2026-09-03
A practical maxon motor FAQ written from a B2B buyer's perspective. Learn how to read a maxon motor datasheet, when you need a brushless DC motor driver, what servo motors really are, and what VFD stands for — with real procurement lessons on total cost of ownership.
Read article2026-09-02
An applications engineer recounts the $4,800 mistake that taught him to stop comparing motor unit prices and start comparing total cost of ownership — with hard numbers from NEMA stepper motors, liftgate pump failures, and VFD sizing.
Read article2026-09-02
A procurement manager explains why the lowest motor quote is rarely the lowest total cost. Includes maxon-motor pricing, the Maxon Air S e-MTB motor, stepper motor speed limits, induction motor diagrams, and a Starkville timing belt replacement story.
Read article2026-08-31
A procurement manager compares maxon-motor DC systems, MG90S servo motors, stepper motors, and VFD-driven induction motors on total cost, documentation, wiring effort, and field reliability.
Read article2026-08-31
A procurement manager at a robotics integrator explains why small motor orders deserve premium service, sharing a maxon motor TCO example and lessons from stepper driver and VFD compatibility projects.
Read article2026-08-31
A motion control engineer on why motor selection is never just about the datasheet—brushed DC, EC, and servo motors all fail when the system is ignored.
Read article